The video tutorial instructs you on how to remove the front panel of a freeze dryer. This task typically follows the removal of the other panels and requires careful handling of screws and components.
Tools needed:
- Phillips screwdriver
Steps
- Remove surrounding panels: Before accessing the front panel, detach all other panels of the freeze dryer.
- Remove screws from the bracket: Locate the Phillips screws on the bracket at the side of where the front panel is and unscrew them.
- Detach the computer board ribbon: The computer board and screen do not need to be removed, but you must unhook the gray ribbon cable connected to it.
- Unscrew the hinge: There are additional screws under the area where the hinge is located; these should be removed next.
- Take off the door safety switch cover: Rotate the cover to expose the screws beneath it.
- Remove the lower screws: There are several screws underneath the front panel that must be unscrewed. There may be around seven screws, and one might be stripped, so proceed with caution.
- Remove the front panel: After all the screws have been removed, the front panel should come off easily.
Note: During this process, if you encounter any stripped screws or tight spots that are difficult to access, use the appropriate tools, such as pliers, to assist in the removal. Be careful not to damage the panel or the freeze dryer itself during disassembly.
