In this video, you're shown how to troubleshoot a compressor unit that isn't running by checking for a common issue involving a faulty solder joint.
Tools needed:
- Screwdriver
Steps
- Remove the cap: Use the screwdriver to carefully pry off the cap covering the internal components of the compressor unit.
- Inspect solder joints: Once the cap is removed, locate the small disc with two connections—one on each side. Check these solder joints to ensure they are not broken.
- Repair if necessary: If you find a broken solder joint, re-solder it to restore the connection.
- Test the compressor: After making sure the solder joints are intact or fixing any that were broken, test the compressor to see if it runs.
- Follow-up: If the compressor is still not working after this step, contact the support team for further assistance. If you broke the cap during the process, inform them so they can send a replacement.
