Watch and follow the instructions in the video, "Replacing a Drain Valve"

Video Overview: How to Replace a Drain Valve on a Harvest Right Freeze Dryer

The video provides a step-by-step guide on how to replace a drain valve on a Harvest Right freeze dryer. Following the correct steps and using the right tools can ensure a smooth replacement process.

Tools Required:

• Crescent wrenches
• Roll of Teflon tape

Steps:

Step 1: Disconnect Power – Make sure to unplug the machine and turn it off for safety.

Step 2: Remove Side Panels – You will need to remove the side panels to access the valve. For instructions on how to do this, you can refer to another Harvest Right video tutorial.

Step 3: Loosen Old Valve – Use one crescent wrench on the brass body of the hose connector and another on the valve. Turn counterclockwise to loosen the valve.

Step 4: Remove Old Teflon Tape – Once the old valve is removed, clear off any remaining Teflon tape. A wire brush may be helpful for this step.

Step 5: Apply New Teflon Tape – Apply 3-4 wraps of new Teflon tape to the hose connection in a clockwise direction. Less than 3 wraps or more than 4 can result in leaks.

Step 6: Install New Valve – Thread the new valve on by hand as far as you can. Use the crescent wrenches for final tightening. Ensure the valve is oriented upwards for convenience.

💡 Note: If you encounter any difficulties or have further questions, feel free to contact tech support.

Conclusion:

Replacing a drain valve on your Harvest Right freeze dryer is a straightforward process if you follow the steps carefully and use the correct tools. Always prioritize safety by disconnecting the power before starting the procedure.