Watch and follow the instructions in the video, “Freeze Dryer Set Up”

How to Set Up Your Harvest Right Freeze Dryer

This video provides a straightforward guide on setting up your Harvest Right freeze dryer. The setup process is quick and easy, and the video walks you through each step.

Steps:

Step 1: Find a Suitable Location – Choose a place to put your freeze dryer, such as a garage, utility room, or basement.

Step 2: Place on a Secure Surface – Put the freeze dryer on a secure cart or table.

Step 3: Clean the Door Gasket – Open the door, remove the gasket, and clean it under cold water. Make sure it's dry before reattaching.

Step 4: Fill the Vacuum Pump with Oil – Use the provided oil to fill your vacuum pump. Tighten the cap hand-tight.

Step 5: Attach the Vacuum Hose – Attach one end of the hose to the vacuum pump and the other to the freeze dryer. Ensure it's tightly connected.

Step 6: Plug in the Vacuum Pump and Freeze Dryer – Plug the vacuum pump into the freeze dryer, and then plug the freeze dryer into the wall.

Step 7: Perform a Setup Test – Latch the door and refer to the owner's manual to perform a setup test, ensuring everything is working properly.

Conclusion:

Once the setup is complete, you're ready to start the freeze-drying process. If you encounter any issues or have questions, refer to your owner’s manual or contact Harvest Right for support.

Watch the video for a detailed guide on the setup process.