IT’S HERE. TIME TO GET EXCITED!

Let’s Get You Freeze Drying.

Your new Harvest Right Countertop 360 Freeze Dryer has arrived. You’re just a few steps away from your first batch.

Countertop Freeze Dryer in Kitchen
STEP 01

UNBOX IT

Cut the straps, lift the outer box straight up and remove the protective packaging.

GRAB A FRIEND

Two people should lift the freeze dryer. Always lift from the metal bottom, never the door or drain.


Freeze Dryer Placement
STEP 02

FIND ITS SPOT

LEVEL SURFACE • OPEN SPACE • VENTS CLEAR

Give your freeze dryer plenty of room for airflow. Do not place it in an enclosed cabinet or tight space.

GIVE IT 24 HOURS

Let your freeze dryer sit for 24 hours before operating so the refrigerant can settle after shipping.

STEP 03

GET TO KNOW IT

A few things you’ll want to know about your new unit.

Countertop Freeze Dryer Diagram
Drain Pan Close-up
1

DRAIN PAN

Pull it out. Empty it. Slide it back in.

Vacuum Pump Close-up
2

VACUUM PUMP

There may be a zip tie securing the pump. If there is one, cut the zip tie so that the pump can move in and out.

Chamber and Door Close-up
3

CHAMBER + DOOR

Close and latch firmly for an airtight seal.

Touchscreen Close-up
4

TOUCHSCREEN

Follow the prompts and press start. Your freeze dryer automatically manages the process and guides you along the way.

STEP 04

ADD THE PUMP OIL

Don’t Forget This Step. Your pump ships without oil and is secured for shipping.

BEFORE FIRST USE

There may be a zip tie securing the pump. If there is one, cut the zip tie so that the pump can move in and out and fill it properly.

Fill with the included mineral oil to about the ¾ mark on the sight glass.

1. CUT ZIP TIE

There may be a zip tie securing the pump. If there is one, cut the zip tie so that the pump can move in and out.

2. SLIDE OUT PUMP

3. REMOVE CAP & ADD OIL

4. CHECK SIGHT GLASS

PUMP READY. ✓

Pump Oil Fill Close-up
STEP 05

ALMOST THERE

Before You Press Start, run through this quick pre-flight checklist:

✓ Waited 24 hours
✓ Cut zip tie (if present)
✓ Added oil to the pump
✓ Level surface
✓ Vents clear
✓ Door + gasket clean
✓ Drain closed
✓ Door latched
✓ Power connected (110V outlet)

*A dedicated 15-amp circuit is recommended.

CLEANING THE DOOR?

Warm water + dry cotton cloth only. No household cleaners.


STEP 06

YOUR FIRST RUN

Grab Some Bread. Before starting your first batch, complete one simple burn-in batch to confirm your freeze dryer is operating properly and remove any manufacturing odors.

LOAD

Fill each tray with moist bread.

START

Run a normal freeze-drying cycle.

CHECK

Make sure the bread is completely dry.

DISCARD

Throw the bread away.

YOU DID IT!

Now Freeze Dry Something More Exciting Than Bread.

STRAWBERRIES • PINEAPPLE • YOGURT • ICE CREAM • CANDY • SOUP

Freeze Dried Foods Showcase

Your Countertop 360 Freeze Dryer is set up, tested, and ready to go!

EXPLORE WHAT YOU CAN FREEZE DRY →

GET EVEN MORE FROM YOUR FREEZE DRYER

App Icon

GET THE APP

Recipes, tips, guidance and 24/7 support.

Wi-Fi Icon

ADD WI-FI

Optional Wi-Fi lets you monitor your batch from your phone.

LEARN ABOUT WI-FI →
Support Icon

NEED HELP?

Get answers and connect with Customer Support.

GET SUPPORT →

A FEW THINGS TO KNOW FOR LATER

PUMP OIL MAINTENANCE

CHECK IT: Look at the sight glass after each batch. Oil should be clear.

FILTER IT: If the oil becomes cloudy, dark or milky, filter or replace it. This is typically needed after about 20–25 cycles.

REUSE IT or REPLACE IT: Drain the oil through the included filter, then return the filtered oil to the pump, or refill with new oil.

Pump Oil Visual Guide

JUST FOLLOW THE PROMPTS

Your freeze dryer continuously monitors refrigeration, vacuum, and heating while it runs. If something needs attention, just follow the instructions on the screen.

QUESTIONS? WE’RE HERE.

Get help, find recipes or discover something new to freeze dry.

GET SUPPORT
×

CHOOSE YOUR DEVICE

Select your operating system to download the Harvest Right App: