Video link: https://youtu.be/-XXFtYw9lI0

Video Summary

Video summarizes how to replace the screen on an Analog Freeze Dryer. Tools needed are a 5mm socket wrench and a 1/8 allen wrench. Steps include removing the side panel and power switch, unplugging the old screen, and installing the new one. Finally, reattach all components in reverse order.

Video Transcript

Analog Freeze Dryer Screen Replacement

Tools Needed For the Job:

• 5mm socket wrench
• 1/8 allen wrench

Step #1: Remove the right hand side panel

Step #2: Remove the toggle power the front panel

Step #3: Unplug the cable from the screen

Step #4: Remove the 4 5mm nuts from the corner of the screen board

Step #5: Insert new screen

Step #6: Reattach the 5mm nuts onto the screen board

Step #7: Tighten nuts with 5mm socket

Step #8: Reattach power cable to the screen board

Step #9: Push the toggle power switch back into its place

Final Step: Reattach side panel